Magnetic Chuck for Work holding

Magnetic Chuck for Work holding

Brief introduction:

    1, the circular permanent magnetic chuck (round magnetic chuck) can be used as auxiliary tool for various kinds of plain surface grinder, universal tool and lathe for holding ferromagnetic materials for machining.
   2, because it is not require power source, not heated and is with small distortion and high precision, the application scope is very wide.
   3, According to its structure, the circular permanent-magnetic chuck can be classified as straight strip fine-pole type, ordinary pole type and radial pole type.

Key features:                

1. Magnetic powerful, high machining accuracy. Maximum suction table 13-18kg/cm ², is an ordinary magnetic suction cup 2 times, to ensure that the work piece clamping firm plan move does not appear strained, due process does not require electricity, so there is no heat distortion of the phenomenon of products, effective ensure accuracy.

2. Safe, strong, energy saving, environmental protection. Magnetic sucker in the work process does not require electricity, rely on suction for holding permanent jobs, to avoid the electromagnetic system and the cord is damaged in a sudden power loss arising from the magnetic piece off the danger. Because only in the charging electric permanent magnetic chuck and the degaussing process energy used within 1-2 seconds, the work did not use any energy and produce safe, strong, efficient power, both economic, and environmental protection.